Hot Finish EN 10210 S355J2H SHS

Hot Rolled S355J2H Mild Steel Square Hollow Section Exporters, Hot Finished EN10210 S355J2H Square Box Sections, S355J2H CS Hot Finish Square Pipes Distributors, BS EN 10210 S355J2H Hot Finish SHS Tubes in Mumbai, India.

EN10210 S355J2H MS Hot Finished Square Tube Stockists in India, Carbon Steel S355J2H Hot Finish Square Hollow Section Suppliers, Hot Finish EN 10210 S355J2H SHS Pipe in Mumbai.

EN 10210 S355J2H Hot Finished Welded Structural Square Hollow Sections, EN 10210 Hot Finish S355J2H ERW SHS Pipes, EN 10210 S355J2H Seamless Hot Finish Square Hollow Section Tubing Dealers in India.

   

Ranflex Metals is one of the best Manufacturer, Stockiest, Supplier, and exporter of Hot Finished S355J2H Mild Steel Square Hollow Section. This Hot Finished EN 10210 S355J2H Square Hollow Section ERW pipe contains 1.60% manganese content, silicon content 0.55%, & carbon content up to 0.22%, and phosphorus and sulfur content up to 0.030%. The length of Hot Finished EN 10210 S355J2H Square Hollow Section EFW Pipes starts from 6000mm to 14000mm and its wall thickness ranges from 0.5mm to 25mm. Customers can get these pipes as per their specifications.

S355J2H Hot Finished Welded Structural Square Hollow Sections are mostly at high elevated temperature. It can be effectively used between the temperature range of 932 Degree F to 1472 Degree F. In continues service, It can be used up to 1650.2 Degree C. These Hot Finished EN 10210 S355J2H Square Box Sections are less resistant to air and water. It possesses high yield strength. It also possesses high welding properties. These hollow sections are highly durable and It is available at the most affordable price. These Hot Finished EN 10210 S355J2H Square Hollow Section Round Pipes cannot be strengthened further by the heat working process. It possesses high mechanical properties.

Hot Finished EN 10210 S355J2H Square Hollow Sections are widely used in the marine industry and seawater equipment. Hot Finished EN 10210 S355J2H Square Hollow Section Square Pipes are mostly used in the food processing units. These hollow sections are often used in the construction industry. It is mostly used in the construction of buildings, dams, etc.

Hot Finish EN 10210 S275J2H SHS Specification


Standard

  BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels

Grade

S355J2H

SHS (Square Hollow Sections) Sizes

 20*20mm-400*400mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Hot Finish EN 10210 S355J2H SHS Properties



Hot Finish EN 10210 S275J2H SHS Services



Worldwide Exporters of Hot Finish EN 10210 S275J2H SHS