Hot Finished EN 10210 S275J2H Square Hollow Section contains 1.5% manganese content, carbon content up to 0.20%, and phosphorus and sulfur content up to 0.030%. these Hot Finished EN 10210 S275J2H Square Hollow Section ERW Pipes are produced using the best quality raw material and updated technology. This Hot Finished EN S275J2H Square Hollow Section is used in various industries due to its distinct features. It has the best corrosion resistance properties and it can be used widely at the high elevated temperature.
These Hot Finished S275J2H Mild Steel Square Hollow Sections have the best corrosion resistance to pitting and crevice corrosion. It is also highly resistant to the acidic environment. Hot Finished En 10210 S275J2H Square Hollow Section Hexagonal Pipes can be heated between 797 Degree F to 1580 Degree F. This is grade is mostly used in a high-temperature environment. It has long durability and it possesses high tensile strength. Hot Finished EN 10210 S275J2H Square Hollow Sections possess the best corrosion resistance to intergranular and general corrosion. The wall thickness of these Grade S275J2H Hot Finished Welded Structural Square Hollow Section starts from 0.5mm to 25mm, and it is available in 20mm*20mm to 400mm*400mm sizes. It comes in an accurate design with a seamless finish. The international standards of these Carbon Steel S275J2H Square Hollow Sections are ASTM. EN, DIN, and ASME.
These Hot Finished EN 10210 S275J2H Square Hollow Section round pipes are used in various industries. It is mostly used in food processing equipment and food packaging equipment. Hot Finished En 10210 S275J2H Square Hollow Section Rectangular Pipes are mostly used In marine industries and seawater equipment. It can also be used in Construction industries such as in the construction of dams, buildings, etc.
Standard |
BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels |
Grade |
S275J2H |
SHS (Square Hollow Sections) Sizes |
20*20mm-400*400mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |