Hot Finish EN 10210 S355J0H SHS

Carbon Steel S355J0H Hot Finish Square Hollow Section Suppliers, EN10210 S355J0H MS Hot Finished Square Tube Stockists in India, Hot Finish EN 10210 S355J0H SHS Pipe in Mumbai.

Hot Finished EN10210 S355J0H Square Box Sections, S355J0H CS Hot Finish Square Pipes Distributors, BS EN 10210 S355J0H Hot Finish SHS Tubes, Hot Rolled S355J0H Mild Steel Square Hollow Section Exporters in Mumbai, India.

EN 10210 S355J0H Hot Finished Welded Structural Square Hollow Sections, EN 10210 S355J0H Seamless Hot Finish Square Hollow Section Tubing, EN 10210 Hot Finish S355J0H ERW SHS Pipes Dealers in India.

   

Ranflex Metals is one of the best manufacturers, exporter, and stockiest of EN 10210 S355J0H Mild Steel Hot Finished Square Hollow Sections. These EN 10210 Hot Finished S355J0H Square Hollow Section Pipes usually contains 1.60% manganese, silicon content up to 0.55%, phosphorus and sulfur content up to 0.35%, and 0.22% carbon content. Its length ranges from 6000mm to 18000mm, and its wall thickness starts from 1.8mm to 14.27mm. These Grade S355J0H Hot Finished Welded Structural Square Hollow Sections are available in different sizes and shapes. However, one can get these hollow sections in their desired shapes and sizes.

Hot Finished EN 10210 S355J0H Square Hollow Section Pipes have high corrosion resistance to high-temperature environment and it is mostly used at highly elevated temperatures. It is also highly resistant to general corrosion. These Hot Finished EN 10210 S355J0H Square Box Sections possesses high tensile strength and yield strength. It is manufactured following international quality standards. These EN 10210 S55J0H Mild Steel Hot Finished Square Tubes have the best corrosion resistance to oxidation corrosion.

Hot Finished EN 10210 S355J0H Square Hollow Section is mostly used in the marine industry and seawater equipment. It is also used in machinery parts, screws, shafts, and fasteners. Hot Finished EN 10210 S355J0H Square Hollow Section ERW Pipes are mostly used in heat exchangers and condensers. Hot Finished EN 10210 S355J0H Square Hollow Sections can be used in food processing units and food packaging units.

Hot Finish EN 10210 S355J0H SHS Specification


Standard

  BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels

Grade

S355J0H

SHS (Square Hollow Sections) Sizes

 20*20mm-400*400mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Hot Finish EN 10210 S355J0H SHS Properties



Hot Finish EN 10210 S355J0H SHS Services



Worldwide Exporters of Hot Finish EN 10210 S355J0H SHS