Ranflex Metals is one of the best manufacturer, supplier, exporter, and stockiest of Hot Finished EN 10210 S235JRH Rectangular Hollow Section, which has many features such as long durability, good conductivity, excellent forming and welding properties, and ductility. It possesses high tensile strength and has accurate dimension. EN 10210 is the standard number of this pipe. Its length starts from 6000mm to 18000mm. its outer diameter ranges from 21.3mm to 457.2mm, whereas wall thickness ranges from 1.8mm to 14.27mm. EN 10210 S235JRH Seamless Hot Finished Rectangular Hollow Section Tubing possesses best fire resistance and corrosion resistance properties.
The EN 10210 S235JRH Mild Steel Hot Finished Rectangular Tube can be welded by many standard welding methods such as by SAW, MAG, and TIG. One can buy this Rectangular Hollow Section at very affordable rates. These Rectangular Hollow Section Welded Pipes are Non- magnetic and can be hardened further by cold working process. Carbon Steel S235JRH Rectangular Hollow Section possesses good machinability characteristics. At Ranflex Metals we always make sure that our products are always manufactured using premium quality raw material and advance technology only.
These Rectangular Hollow Sections are used in most of the industries, S235JRH CS Hot Finished Rectangular Pipes are widely used in construction industries as in construction of buildings, bridges, and dams. It is also used in marine industries and in offshore oil drilling companies. It is the most widely used commercial grade. Hot Finished EN 10210 S235JRH Rectangular Hollow Section Square Pipes are also used in chemical processing equipment and pharmaceutical equipment. Hot Finished EN 10210 S235JRH Rectangular Box Sections are mostly used in water engineering and mechanical engineering.
Standard |
BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels |
Grade |
S235JRH |
Sizes |
10mm x 15mm --- 150mmx50mm --- 300mmx400mm --- 600mmx550mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |