-
Email sales@ranflexmetals.com
-
Call Now +(91)-(22)-23856366
HOLLOW SECTION is one of the best manufacturers, exporter, and stockiest of EN 10219 S355J0H Mild Steel Cold Formed Square Hollow Sections. These EN 10219 Cold Formed S355J0H Square Hollow Section Pipes usually contains 1.60% manganese, silicon content up to 0.55% , phosphorus and sulfur content up to 0.35%, and 0.22% carbon content. Its length ranges from 6000mm to 18000mm, and its wall thickness starts from 1.8mm to 14.27mm. These Grade S355J0H Cold Formed Welded Structural Square Hollow Sections are available in different sizes and shapes. However, one can get these hollow sections in their desired shapes and sizes.
Cold Formed EN 10219 S355J0H Square Hollow Section Pipes have high corrosion resistance to high-temperature environment and it is mostly used at highly elevated temperatures. It is also highly resistant to general corrosion. These Cold Formed EN 10219 S355J0H Square Box Sections possesses high tensile strength and yield strength. It is manufactured following international quality standards. These EN 10219 S55J0H Mild Steel Cold Formed Square Tubes have the best corrosion resistance to oxidation corrosion.
Cold Formed EN 10219 S355J0H Square Hollow Section is mostly used in the marine industry and seawater equipment. It is also used in machinery parts, screws, shafts, and fasteners. Cold Formed EN 10219 S355J0H Square Hollow Section ERW Pipes are mostly used in heat exchangers and condensers. Cold Formed EN 10219 S355J0H Square Hollow Sections can be used in food processing units and food packaging units.
|
Standard |
BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels |
|
Grade |
S355J0H |
|
SHS (Square Hollow Sections) Sizes |
20*20mm-400*400mm |
|
Wall Thickness |
0.5mm - 25mm |
|
Length |
6000-14000 mm |
|
Type |
Seamless/ Welded / ERW |
|
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
|
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
|
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |
| Steel Grade | C | Si | Mn | P | S | N | Carbon Equivalent(CEV) |
| S355J0H | 0.22 | 0.55 | 1.60 | 0.035 | 0.035 | 0.009 | 0.45 |
| Grade | Min. Yield Strength Reh(Mpa) | Tensile Strength Rm (MPa) | Elongation % Min. | Min. Impact Energy(J) | ||||
| Thk≤ 16 mm | Thk>16 ≤ 40 mm | Thk<3 mm | Thk≥3 mm | -20°C | 0°C | 20°C | ||
| S355J0H | 355 | 345 | 510-680 | 470-630 | 20 | 27 | - | - |
| Size mm | kg/m | Size mm | kg/m |
| 20 x 20 x 2.0 | 1.12 | 20 x 20 x 2.5 | 1.35 |
| 25 x 25 x 1.5 | 1.06 | 25 x 25 x 2.0 | 1.43 |
| 25 X 25 X 2.5 | 1.74 | 25 X 25 X 3.0 | 2.04 |
| 30 X 30 X 2.0 | 1.68 | 30 X 30 X 2.5 | 2.14 |
| 30 X 30 X 3.0 | 2.51 | 40 x 40 x 1.5 | 1.81 |
| 40 x 40 x 2.0 | 2.31 | 40 x 40 x 2.5 | 2.92 |
| 40 x 40 x 3.0 | 3.45 | 40 x 40 x 4.0 | 4.46 |
| 40 x 40 x 5.0 | 5.40 | 50 x 50 x 1.5 | 2.28 |
| 50 x 50 x 2.0 | 2.93 | 50 x 50 x 2.5 | 3.71 |
| 50 x 50 x 3.0 | 4.39 | 50 x 50 x 4.0 | 5.72 |
| 50 x 50 x 5.0 | 6.97 | 60 x 60 x 3.0 | 5.34 |
| 60 x 60 x 4.0 | 6.97 | 60 x 60 x 5.0 | 8.54 |
| 60 x 60 x 6.0 | 9.45 | 70 x 70 x 3.0 | 6.28 |
| 70 x 70 x 3.6 | 7.46 | 70 x 70 x 5.0 | 10.11 |
| 70 x 70 x 6.3 | 12.50 | 70 x 70 x 8 | 15.30 |
| 75 x 75 x 3.0 | 7.07 | 80 x 80 x 3.0 | 7.22 |
| 80 x 80 x 3.6 | 8.59 | 80 x 80 x 5.0 | 11.70 |
| 80 x 80 x 6.0 | 13.90 | 90 x 90 x 3.0 | 8.01 |
| 90 x 90 x 3.6 | 9.72 | 90 x 90 x 5.0 | 13.30 |
| 90 x 90 x 6.0 | 15.76 | 90 x 90 x 8.0 | 20.40 |
| 100 x 100 x 3.0 | 8.96 | 100 x 100 x 4.0 | 12.00 |
| 100 x 100 x 5.0 | 14.80 | 100 x 100 x 5.0 | 14.80 |
| 100 x 100 x 6.0 | 16.19 | 100 x 100 x 8.0 | 22.90 |
| 100 x 100 x 10 | 27.90 | 120 x 120 x 5 | 18.00 |
| 120 x 120 x 6.0 | 21.30 | 120 X 120 X 6.3 | 22.30 |
| 120 x 120 x 8.0 | 27.90 | 120 x 120 x 10 | 34.20 |
| 120 X 120 X 12 | 35.8 | 120 X 120 X 12.5 | 41.60 |
| 140 X 140 X 5.0 | 21.10 | 140 X 140 X 6.3 | 26.30 |
| 140 X 140 X 8 | 32.90 | 140 X 140 X 10 | 40.40 |
| 140 X 140 X 12.5 | 49.50 | 150 X 150 X 5.0 | 22.70 |
| 150 X 150 X 6.3 | 28.30 | 150 X 150 X 8.0 | 35.40 |
| 150 X 150 X 10 | 43.60 | 150 X 150 X 12.5 | 53.40 |
| 150 X 150 X 16 | 66.40 | 150 X 150 X 16 | 66.40 |
| 180 X 180 X 5 | 27.40 | 180 X 180 X 6.3 | 34.20 |
| 180 X 180 X 8 | 43.00 | 180 X 180 X 10 | 53.00 |
| 180 X 180 X 12.5 | 65.20 | 180 X 180 X 16 | 81.40 |
| 200 X 200 X 5 | 30.50 | 200 X 200 X 6 | 35.8 |
| 200 x 200 x 6.3 | 38.2 | 200 x 200 x 8 | 48.00 |
| 200 x 200 x 10 | 59.30 | 200 x 200 x 12.5 | 73.00 |
| 200 x 200 x 16 | 91.50 | 250 x 250 x 6.3 | 48.10 |
| 250 x 250 x 8 | 60.50 | 250 x 250 x 10 | 75.00 |
| 250 x 250 x 12.5 | 92.60 | 250 x 250 x 16 | 117.00 |
| 300 x 300 x 6.3 | 57.90 | 300 x 300 x 8 | 73.10 |
| 300 x 300 x 10 | 57.90 | 300 x 300 x 8 | 90.70 |
| 300 x 300 x 12.5 | 112.00 | 300 x 300 x 16 | 142.00 |
| 350 x 350 x 8 | 85.70 | 350 x 350 x 10 | 106.00 |
| 350 x 350 x 12.5 | 132.00 | 350 x 350 x 16 | 167.00 |
| 400 x 400 x 10 | 122.00 | 400 x 400 x 12 | 141.00 |
| 400 x 400 x 12.5mm | 152.00 | 400 x 400 x 16 | 192 |
We Hollow Section Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
We Hollow Section Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
We Hollow Section Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
