Cold Formed EN 10219 S355J2H SHS

EN 10219 S355J2H MS Cold Formed Square Tube Stockists in India, Carbon Steel S355J2H Square Hollow Section Suppliers in Mumbai, Cold Formed EN 10219 S355J2H SHS Pipe.

EN 10219 S355J2H Seamless Cold Formed Square Hollow Section Tubing, S355J2H Cold Formed Welded Structural Square Hollow Section, EN 10219 Cold Formed S355J2H ERW SHS Pipes Dealers in India.

Cold Formed S355J2H Mild Steel Square Hollow Section Exporters, S355J2H CS Cold Formed Square Pipes Distributors, Cold Formed EN 10219 S355J2H Square Box Sections, BS EN 10219 S355J2H Cold Formed SHS Tubes in Mumbai, India.

   

Ranflex Metals is one of the best Manufacturer, Stockiest, Supplier, and exporter of Cold Formed S355J2H Mild Steel Square Hollow Section. This Cold Formed EN 10219 S355J2H Square Hollow Section ERW pipe contains 1.60% manganese content, silicon content 0.55%, & carbon content up to 0.22%, and phosphorus and sulfur content up to 0.030%. The length of Cold Formed EN 10219 S355J2H Square Hollow Section EFW Pipes starts from 6000mm to 14000mm and its wall thickness ranges from 0.5mm to 25mm. Customers can get these pipes as per their specifications.

S355J2H Cold Formed Welded Structural Square Hollow Sections are mostly at high elevated temperature. It can be effectively used between the temperature range of 932 Degree F to 1472 Degree F. In continues service, It can be used up to 1650.2 Degree C. These Cold Formed EN 10219 S355J2H Square Box Sections are less resistant to air and water. It possesses high yield strength. It also possesses high welding properties. These hollow sections are highly durable and It is available at the most affordable price. These Cold Formed EN 10219 S355J2H Square Hollow Section Round Pipes cannot be strengthened further by the heat working process. It possesses high mechanical properties.

Cold Formed EN 10219 S355J2H Square Hollow Sections are widely used in the marine industry and seawater equipment. Cold Formed EN 10219 S355J2H Square Hollow Section Square Pipes are mostly used in the food processing units. These hollow sections are often used in the construction industry. It is mostly used in the construction of buildings, dams, etc.

Cold Formed EN 10219 S355J2H SHS Specification


Standard

 BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade

 S355J2H

SHS (Square Hollow Sections) Sizes

 20*20mm-400*400mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Cold Formed EN 10219 S355J2H SHS Properties



Cold Formed EN 10219 S355J2H SHS Services



Worldwide Exporters of Cold Formed EN 10219 S355J2H SHS