HOLLOW SECTION is one of the best manufacturers, seller, exporter, and stockiest of Cold Formed EN 10219 S275J0H Square Hollow Section. At Ranflex Metals, these Cold Formed EN 10219 S275J0H Square Hollow Sections are made using good quality raw material and the best technology. EN 10219 Cold Formed S275J0H ERW Square Hollow Section Pipe has the best corrosion resistance to pitting and crevice corrosion. The length of these Cold Formed EN 10219 S275J0H Square Hollow Section is from 6000mm to 14000mm, and its size ranges from 20mm*20mm to 400mm*400mm.
Cold Formed EN 10219 S275JOH Square Hollow Section provides the excellent corrosion resistance to oxidation corrosion up to 1598 Degree F, whereas, it continuous service it gives corrosion resistance up to 1697 Degree F. Cold Formed EN 10219 S275J0H Square Hollow Section ERW Pipes offers high tensile strength and best welding properties. At Ranflex Metals, We always emphasized that our EN 10218 S275J0H MS Cold Formed Square Tubes are being manufactured following international quality standards. It has the best mechanical properties. These Grade S2750H Cold Formed Welded Structural Square Hollow Section has an accurate rugged design and higher durability. It contains manganese content up to 1.6%, and some portion of carbon, silicon, phosphorus, and sulfur content.
Cold Formed EN 10219 S275J0H Square Hollow Section Seamless Pipes are mostly used in the oil & gas processing units. It is also used in the pulp and paper industry. Cold Formed EN 10219 S275J0H Square Box Sections are usually used in the marine industry and offshore oil drilling companies. It is widely used in the chemical industry and the petrochemical industry. Grade S2750H Cold Formed Welded Structural Square Hollow Section is used extensively in the petroleum industry.
Standard |
BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels |
Grade |
S275J0H |
SHS (Square Hollow Sections) Sizes |
20*20mm-400*400mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |