Cold Formed EN 10219 S275J2H SHS

BS EN 10219 S275J2H Cold Formed SHS Tubes, Cold Formed EN 10219 S275J2H Square Box Sections, Cold Formed S275J2H Mild Steel Square Hollow Section Exporters, S275J2H CS Cold Formed Square Pipes Distributors in Mumbai, India.

Cold Formed EN 10219 S275J2H SHS Pipe, Carbon Steel S275J2H Square Hollow Section Suppliers in Mumbai, EN 10219 S275J2H MS Cold Formed Square Tube Stockists in India.

EN 10219 S275J2H Seamless Cold Formed Square Hollow Section Tubing, Grade S275J2H Cold Formed Welded Structural Square Hollow Section, EN 10219 Cold Formed S275J2H ERW SHS Pipes Dealers in India.

   

Cold Formed EN 10219 S275J2H Square Hollow Section contains 1.5% manganese content, carbon content up to 0.20%, and phosphorus and sulfur content up to 0.030%. these Cold Formed EN 10219 S275J2H Square Hollow Section ERW Pipes are produced using the best quality raw material and updated technology. This Cold Formed EN S275J2H Square Hollow Section is used in various industries due to its distinct features. It has the best corrosion resistance properties and it can be used widely at the high elevated temperature.

These Cold Formed S275J2H Mild Steel Square Hollow Sections have the best corrosion resistance to pitting and crevice corrosion. It is also highly resistant to the acidic environment. Cold Formed En 10219 S275J2H Square Hollow Section Hexagonal Pipes can be heated between 797 Degree F to 1580 Degree F. This is grade is mostly used in a high-temperature environment. It has long durability and it possesses high tensile strength. Cold Formed EN 10219 S275J2H Square Hollow Sections possess the best corrosion resistance to intergranular and general corrosion. The wall thickness of these Grade S275J2H Cold Formed Welded Structural Square Hollow Section starts from 0.5mm to 25mm, and it is available in 20mm*20mm to 400mm*400mm sizes. It comes in an accurate design with a seamless finish. The international standards of these Carbon Steel S275J2H Square Hollow Sections are ASTM. EN, DIN, and ASME.

These Cold Formed EN 10219 S275J2H Square Hollow Section round pipes are used in various industries. It is mostly used in food processing equipment and food packaging equipment. Cold Formed En 10219 S275J2H Square Hollow Section Rectangular Pipes are mostly used In marine industries and seawater equipment. It can also be used in Construction industries such as in the construction of dams, buildings, etc.

Cold Formed EN 10219 S275J2H SHS Specification


Standard

 BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade

 S275J2H

SHS (Square Hollow Sections) Sizes

 20*20mm-400*400mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Cold Formed EN 10219 S275J0H SHS Properties



Cold Formed EN 10219 S275J0H SHS Services



Worldwide Exporters of Cold Formed EN 10219 S275J0H SHS