At Ranflex Metals, Hot Finish Square Hollow Section are being manufactured using premium quality raw material and latest update technology so that clients can have an advantage of durability. The Hot Finished IS4923 YST210 SHS are designed and manufactured under the guidance of highly skilled experts. Customization option is also available here, customers can easily get it design and manufactured as per their specification. It possesses high tensile strength and provides corrosion resistance and fire resistance properties. IS 4923 YST 210 Hot Finished Carbon Steel Square Hollow Section is mostly used in marine industries and oil and gas industries and it can also be used effectively at high elevated temperatures.
These Hot Finished IS 4923 YST 210 SHS Pipes are also used in many industries due to its distinct features. It is widely used in the petrochemical industry, petroleum industry, and the oil and gas industry. To convey oil, chemicals, water, and gas from one place to another place these IS 4923 YST 210 Steel Pipes are mostly preferred compared to other grades. These IS 4923 YST SHS Pipes possesses high tensile strength and can be used in high elevated temperature. The Size of Hot Finished IS4923 YST210 Hollow Section ranges from 20*20 mm To 400*400 mm and It is available at most affordable rates. The IS 4923 YST 210 Hollow Section possesses excellent non-corrosive properties. These tubes are often under pressure and are capable of performing better even in such conditions.
These IS 4923 Square Tubes are pass through several tests before delivering it to clients, These tests include ultrasonic light, x-ray light, and flattening test. It is packed using steel bundle and plastic end caps so that it cannot get damaged and rusted during transporting it from one place to another.
Sizes | 20mm x 20mm TO 400 x 400mm |
Wall Thickness: | 0.5mm - 25mm |
Length : | 6.0 m ± 0.05 m Customized length ranging from 6 m to 11 m |
Type : | Seamless/ Welded / ERW |
Dimensional Tolerances : | Thickness : (All sizes +/- 10%) |
Outside Dimensions of sides : | +/-1% with a minimum of +/-0.50 mm |
Squareness of Corners : | 90 deg.+/-2 deg. |
Corner radius : | 3 t, Max where t is the thickness of the section. |
Corner radius : | 3 t, Max where t is the thickness of the section. |
Concavity / Convexity : | 1 percent of the size |
Twist Tolerance : | Maximum 2 mm ± 0.05 mm/m length-measured relative vertical shift of any adjacent corner of the section, measured by keeping one side on flat surface |
End Finish : | Plain ended-Mechanically sheared, mill-cut finish without further machining. |
Packing : | In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Finish : | Black without any surface treatment of oiling or varnishing. |