-
Email sales@ranflexmetals.com
-
Call Now +(91)-(22)-23856366
Ranflex Metals is one of the best manufacturers, suppliers, and stockiest of EN 10210 S275J2H Hot Finished Circular Hollow Section contains manganese content up to 1.5%, phosphorus and sulfur content up to 0.030%. It also contains 0.20% carbon content. Like every other product, these Hot Finished EN 10210 S275J2H Circular Hollow Sections are manufactured using the best quality raw material, advanced equipment, and advanced technology. This Circular Hollow Section is also used in numerous industries due to its distinct features. Hot Finished En 10210 S275J2H Circular Hollow Section Hexagonal Pipe Is highly resistant to corrosion and it can be used extensively in the high-temperature environment. It comes in an accurate design with a seamless finish.
Hot Finished EN 10210 S275J2H Circular Hollow Sections are highly resistant to the acidic environment and also provides the best corrosion resistance to pitting and crevice corrosion. This is grade is mostly used at highly elevated temperatures. Hot Finished EN 10210 S275J2H Circular Hollow Section ERW Pipes are highly durable grade and possess high tensile strength. These Pipes can be heated between 797 Degree F to 1580 Degree F. Hot Finished EN 10210 S275J2H Circular Hollow Section provides the best corrosion resistance to intergranular and general corrosion. The wall thickness of these Hot Finished EN 10210 S275J2H Circular Hollow Section round pipes ranges from 0.5mm to 25mm. these Circular hollow sections are available in 20mm*20mm to 400mm*400mm. The international standards of these Hot Finished En 10210 S275J2H Circular Hollow Section Circular Pipes are ASTM. EN, DIN, and ASME.
These Circular Hollow Sections are widely used in numerous industries. Hot Finished S275J2H Mild Steel Circular Hollow Sections are mostly used in construction industries such as in the construction of dams, buildings, etc. It is also mostly used In marine industries and seawater equipment. Hot Finished EN 10210 S275J2H Circular Hollow Section can also be used in food processing units.
|
Standard |
BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels |
|
Grade |
S275J2H |
|
Sizes |
300 mm NB |
|
Wall Thickness |
0.5mm - 25mm |
|
Length |
6000 to 12000/18000mm |
|
Type |
Seamless/ Welded / ERW |
|
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
|
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
|
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |
| Steel Grade | % by mass maximum | |||||||
| Steel Name | Steel Number | C specified thickness (mm) | Si | Mn | P | S | N | |
| <_40 | > 40 <_ 120 | |||||||
| S275J2H | 1.0138 | 0.20 | 0.22 | - | 1.50 | 0.035 | 0.035 | - |
| Steel Grade | Minimum yield strength eH Mpa | Minimum tensile strength Rm Mpa | ||||||||
| Steel Name | Steel Number | Specified thickness in mm | Specified thickness in mm | |||||||
| <_16 | >16 <_40 | >40 <_63 | >63 <_ 80 | >80 <_100 | >100 <_120 | <_3 | >3 <_100 | >100 <_ 120 | ||
| S275J2H | 1.0138 | 275 | 265 | 255 | 245 | 235 | 225 | 430-580 | 410-560 | 400-540 |
| Nominal Bore | Outside diameter | Thickness | Weight |
| mm | mm | mm | kg/m |
| 15 | 21.3 | 2.00 | 0.95 |
| 2.60 | 1.21 | ||
| 3.20 | 1.44 | ||
| 20 | 26.9 | 2.30 | 1.38 |
| 2.60 | 1.56 | ||
| 3.20 | 1.87 | ||
| 25 | 33.7 | 2.60 | 1.98 |
| 3.20 | 0.24 | ||
| 4.00 | 2.93 | ||
| 32 | 42.4 | 2.60 | 2.54 |
| 3.20 | 3.01 | ||
| 4.00 | 3.79 | ||
| 40 | 48.3 | 2.90 | 3.23 |
| 3.20 | 3.56 | ||
| 4.00 | 4.37 | ||
| 50 | 60.3 | 2.90 | 4.08 |
| 3.60 | 5.03 | ||
| 5.00 | 6.19 | ||
| 65 | 76.1 | 3.20 | 5.71 |
| 3.60 | 6.42 | ||
| 4.50 | 7.93 | ||
| 80 | 88.9 | 3.20 | 6.72 |
| 4.00 | 8.36 | ||
| 4.80 | 9.90 | ||
| 100 | 114.3 | 3.60 | 9.75 |
| 4.50 | 12.20 | ||
| 5.40 | 14.50 | ||
| 125 | 139.7 | 4.50 | 15.00 |
| 4.80 | 15.90 | ||
| 5.40 | 17.90 | ||
| 150 | 165.1 | 4.50 | 17.80 |
| 4.80 | 18.90 | ||
| 5.40 | 21.30 | ||
| 150 | 168.3 | 5.00 | 20.1 |
| 6.3 | 25.2 | ||
| 8.00 | 31.6 | ||
| 10.00 | 39 | ||
| 12.5 | 48 | ||
| 200 | 219.1 | 4.80 | 25.38 |
| 6.00 | 31.51 | ||
| 8.00 | 41.67 | ||
| 10.00 | 51.59 | ||
| 250 | 273 | 6.00 | 39.51 |
| 8.00 | 52.30 | ||
| 10.00 | 64.59 | ||
| 300 | 323.9 | 6.30 | 49.36 |
| 8.00 | 62.35 | ||
| 10.00 | 77.44 |
We Hollow Section Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
We Hollow Section Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
We Hollow Section Ensure the best quality of Packing , because its play important role especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
