When it comes to EN 10025 S355JR / S355J0 / S355J2 WPB Parallel Flange Beam, Ranflex Metals is one of the best manufacturers, suppliers, and exporters of EN 10025 S355JR WPB Parallel Flange Beams. These EN 10025 S355J0 WPB Parallel Flange Beams are used in most of the construction projects. These EN 10025 S355J2 WPB Parallel Flange Beams are used in power plants, industrial sheds, warehouses, offshore structures. These EN 10025 S355JR Parallel Flange Beams has been an ideal choice for construction projects as it provides high strength and it gets manufactured at very cheap rates comparing to other beams.
These EN 10025 S355J0 WPB Parallel Flange Beams can carry weight at the time when wind or an earthquake occurs. These Beams are very light in weightage. These EN 10025 S355JR WPB Parallel Flange Beams can carry vertical gravitational force as well as horizontal loads. It has greater depth. The invention of EN 10025 S355J0 WPB Parallel Flange Beams has been proved one of the important innovations in the industry. This EN 10025 S355J2 WPB Parallel Flange Beam provides the required balance and stability to the construction.
At Ranflex Metals, These EN 10025 S355JR WPB Parallel Flange Beams are manufactured under the proper guidance and direction of industry experts. It provides longer durability. Earlier These EN 10025 S355J0 WPB Parallel Flange Beams were manufactured by the hexagonal pattern on the hot-rolled section of the beam or by cutting up a zigzag. But now these WPB Parallel Flange Beams are produced in different patterns and shapes such as in circular shape or rectangular shape. At Ranflex Metals these WPB Parallel Flange Beams are available in different shapes and patterns, customers can order these WPB Parallel Flange Beams as per their desired shapes, sizes, and patterns. These EN 10025 S355JR WPB Parallel Flange Beams can also be used in refineries, railway bridges, power plants, etc.
Standard |
BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels |
Grade |
S235JRH |
SHS (Square Hollow Sections) Sizes |
20*20mm-400*400mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |