Carbon Steel S235JRH Square Hollow Section Suppliers in Mumbai, Cold Formed EN 10219 S235JRH SHS Pipe, EN 10219 S235JRH MS Cold Formed Square Tube Stockists in India.

Cold Formed S235JRH Mild Steel Square Hollow Section Exporters, BS EN 10219 S235JRH Cold Formed SHS Tubes, Cold Formed EN 10219 S235JRH Square Box Sections, S235JRH CS Cold Formed Square Pipes Distributors in Mumbai, India.

Ranflex Metals is one of the best manufacturers, suppliers, and exporters of ASTM A36 METRIC European Wide Flange Beams. These METRIC Beams possesses the best corrosion resistance properties. These European Wide Flange Beams can be welded, connected, and hot-rolled. Ranflex Metals, These ASTM A36 METRIC Beams are manufactured under the proper guidance and direction of industry experts. It provides longer durability.

The size of these ASTM A36 Beams ranges from 100mm*50mm to 900mm*300mm, Its width ranges from 50mm to 303mm, Depth ranges from 100mm to 918mm, Weight ranges from 9.30 kg/m to 307 kg/m, Whereas its flange thickness ranges from 7mm to 37mm. However, customers can order these METRIC Beams as per their specifications. These ASTM A36 METRIC Beams can also be used in refineries, railway bridges, power plants, etc. ASTM A36 METRIC Beams comes with a perfect finish, compact design, and high tensile strength.

These ASTM A36 METRIC Beams can carry weight at the time when wind or an earthquake occurs. These ASTM A36 METRIC Beams are not that heavy in weightage. Upper and These ASTM A36 METRIC Beams are used in power plants, industrial sheds, warehouses, offshore structures. The upper and lower horizontal part of these ATM A36 METRIC Beams are called as flanges This ASTM A36 METRIC Beam provides the required balance and stability to the construction. These ASTM A36 METRIC Beams are used in most of the construction projects. These ASTM A36 METRIC Beams has been an ideal choice for construction projects as it provides high strength and it gets manufactured at very cheap rates comparing to other beams.

EN 10025 S355JR/S355J0/S355J2 CASTELLATED BEAM Hollow Section Specification


 BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels



SHS (Square Hollow Sections) Sizes


Wall Thickness

 0.5mm - 25mm


 6000-14000 mm


 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)


 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized

ASTM A36 METRIC BEAM Hollow Section Properties


Worldwide Exporters of ASTM A36 METRIC BEAM Hollow Section