Hot Finish EN 10210 S355J2H CHS

EN 10210 Hot Finish S355J2H Mild Steel Circular Hollow Section Exporters, BS EN 10210 S355J2H Hot Finish CHS Tubes, Hot Finish EN10210 S355J2H Round Sections, EN10210 S355J2H CS Hot Finished Round Pipes Distributors in Mumbai, India.

EN 10210 S355J2H Seamless Hot Finish Circular Hollow Section Tubing, EN 10210 Hot Finish S355J2H ERW CHS Pipes Dealers in India, EN 10210 S355J2H Hot Finished Structural Hollow Circular Sections, Hot Finish EN 10210 S355J2H Welded Round Tube.

Hot Finish EN 10210 S355J2H CHS Pipe, Hot Rolled EN 10210 S355J2H Circular Hollow Section Steel Tube Suppliers in Mumbai, BS EN 10210 S355J2H Hot Finish Circular Hollow Section Pipe, EN10210 S355J2H MS Hot Finished Circular Tube Stockists in India, Carbon Steel S355J2H Hot Formed Circular Hollow Sections.

   

Ranflex Metals is one of the best Manufacturer, Stockiest, Supplier, and exporter of Hot Finished S355J2H Mild Steel Circular Hollow Sections. This BS EN 10210 S355J2H Hot Finished CHS Tubes contains manganese content up to 1.60%, silicon & carbon 0.55%, and 0.22% respectively, and phosphorus and sulfur 0.030%. It also includes some portion of molybdenum content. The wall thickness of EN 10210 S355J2H Seamless Hot Finished Circular Hollow Section Tubing ranges from 0.5mm to 25mm and its 6000mm to 14000mm. Customers can grab these pipes as per their specifications.

Usually, Hot Finished EN 10210 S355J2H Circular Hollow Section is used between the temperature range of 500 Degree C to 800 Degree C and In continuous service, It can be used up to 899 Degree C. it can be used effectively at high elevated temperature. These Circular Hollow Sections are less resistant to air and water. Hot Finished EN 10210 S355J2H Circular Box Sections possesses high mechanical strength, and high tensile and yield strength. It possesses the best welding properties. These S355J2H Hot Finished Welded Structural Circular Hollow Sections are highly durable and are available at the most affordable price. This cannot be hardened further by the heat working process.

Hot Finished EN 10210 S355J2H Circular Hollow Section ERW Pipes are mostly used in the construction industry. It is mostly used in the construction of buildings, dams, etc. Hot Finished EN 10210 S355J2H Circular Hollow Section Circular Pipes are widely used in the marine industry and offshore oil drilling companies. It is also mostly used in the architecture industry.

Hot Finish EN 10210 S355J2H CHS Specification


Standard

  BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels

Grade

S355J2H

Sizes

 300 mm NB

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Hot Finish EN 10210 S355J2H CHS Properties



Hot Finish EN 10210 S355J2H CHS Services



Worldwide Exporters of Hot Finish EN 10210 S355J2H CHS