Hot Finish IS4923 YST240 CHS

Hot Finish IS 4923 YST 240 CHS Pipe, Hot Rolled IS-4923 YST-240 Circular Hollow Section Steel Tube Suppliers in Mumbai, IS 4923 YST 240 Hot Finish Circular Hollow Section Pipe, IS4923 YST240 MS Hot Finished Circular Tube Stockists in India, IS 4923 YST 240 Hot Formed Carbon Steel Circular Hollow Sections.

IS 4923 YST 240 Seamless Hot Finish Circular Hollow Section Tubing, Hot Finish IS 4923 YST 240 Welded Round Tube, IS 4923 Hot Finish YST 240 ERW CHS Pipes Dealers in India, IS 4923 YST 240 Hot Finished Structural Hollow Circular Sections.

Hot Finish IS 4923 YST 240 Round Sections Exporters, IS-4923 YST-240 Hot Finish CHS Tubes, IS 4923 Hot Finish YST 240 Mild Steel Circular Hollow Section, IS 4923 YST 240 CS Hot Finished Round Pipes Distributors in Mumbai, India.

   

If you are looking for the best quality hot finish circular hollow section and are you confuse which grade is suitable to buy and are cost effective?. This grade of Hot Finish IS4923 YST240 Circular Hollow Section pipes is the best choice to select and is suitable for any kind of industrial applications. The Hot a finished or hot formed circular section is widely used in mechanical applications and in constructions projects. This hot finished are easier to bend than cold formed hollow sections and are commonly used for curved frames.

The size of the circular hollow section is range from 21.3mm to 508 mm. The thickness of the product ranges from 2.5mm up to 20mm in the larger sections. It follows international standards such as S355J2H and has tested to 20 degrees. This hollow section pipes and tubes can be welded or seamless and can be supplied for different purposes such as anti-corrosive, mechanical and structural. The tensile strength of the product lies between the 470 to 630N / mm2 and yield strength lies within 355N/mm2.

Hot Finish IS4923 YST240 CHS Specification


Standard

 IS 4923 - Hollow steel sections for structural use

Size

 300 mm NB

Outer Diameter

 21.3 to 457.2mm

Wall Thickness

 1.8mm to 14.27mm

Length

 6000 to 12000/18000mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness  (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or circular or round cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Hot Finish IS4923 YST240 CHS Properties



Hot Finish IS4923 YST240 CHS Services



Worldwide Exporters of Hot Finish IS4923 YST240 CHS