-
Email sales@ranflexmetals.com
-
Call Now +(91)-(22)-23856366
Are you looking to buy Hot Finish IS4923 YST210 Circular Hollow Section but confused from where to buy them? We provide the best quality of these pipes at very affordable prices. These hollow section pipes are widely us in many industries like chemical, construction, railways at many other places. They have this wide range of us because they are light in weight, easy to use, cost-efficient, and sturdy in design, superior finish and always come with long service life. We are the best producers of it because we make these pipes with the best quality of available raw materials in the market.
All these pipes are specified with international specifications so that no compromise is done on quality. That is why they are specified with ASTM, AISI, EN etc. and also. They are standardized with international standards such as IS: 4923. When it comes to the size they are available in a wide range of size and also be costumed as per your requirements. Some of the pre available sizes are 6 to 12 meters in length with a diameter of up to 500mm.
|
Standard |
IS 4923 - Hollow steel sections for structural use |
|
Size |
300 mm NB |
|
Outer Diameter |
21.3 to 457.2mm |
|
Wall Thickness |
1.8mm to 14.27mm |
|
Length |
6000 to 12000/18000mm |
|
Type |
Seamless/ Welded / ERW |
|
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
|
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or circular or round cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
|
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |
| Specification | Steel Grade | C | Si | Mn | P | S |
| IS 4923 | YST 310 | 0.12% max. | 0.03% to 0.08% | 0.50% max. | 0.05% max. | 0.05% max. |
| Grade | Min. Tensile Strength Mpa | Min. Yield Stress Mpa | Min. Elongation Percent for size | |
| 25.4 and under | over25.4 | |||
| YST 210 | 330 | 210 | 12 | 20 |
| Nominal Bore | Outside diameter | Thickness | Weight |
| mm | mm | mm | kg/m |
| 15 | 21.3 | 2.00 | 0.95 |
| 2.60 | 1.21 | ||
| 3.20 | 1.44 | ||
| 20 | 26.9 | 2.30 | 1.38 |
| 2.60 | 1.56 | ||
| 3.20 | 1.87 | ||
| 25 | 33.7 | 2.60 | 1.98 |
| 3.20 | 0.24 | ||
| 4.00 | 2.93 | ||
| 32 | 42.4 | 2.60 | 2.54 |
| 3.20 | 3.01 | ||
| 4.00 | 3.79 | ||
| 40 | 48.3 | 2.90 | 3.23 |
| 3.20 | 3.56 | ||
| 4.00 | 4.37 | ||
| 50 | 60.3 | 2.90 | 4.08 |
| 3.60 | 5.03 | ||
| 5.00 | 6.19 | ||
| 65 | 76.1 | 3.20 | 5.71 |
| 3.60 | 6.42 | ||
| 4.50 | 7.93 | ||
| 80 | 88.9 | 3.20 | 6.72 |
| 4.00 | 8.36 | ||
| 4.80 | 9.90 | ||
| 100 | 114.3 | 3.60 | 9.75 |
| 4.50 | 12.20 | ||
| 5.40 | 14.50 | ||
| 125 | 139.7 | 4.50 | 15.00 |
| 4.80 | 15.90 | ||
| 5.40 | 17.90 | ||
| 150 | 165.1 | 4.50 | 17.80 |
| 4.80 | 18.90 | ||
| 5.40 | 21.30 | ||
| 150 | 168.3 | 5.00 | 20.1 |
| 6.3 | 25.2 | ||
| 8.00 | 31.6 | ||
| 10.00 | 39 | ||
| 12.5 | 48 | ||
| 200 | 219.1 | 4.80 | 25.38 |
| 6.00 | 31.51 | ||
| 8.00 | 41.67 | ||
| 10.00 | 51.59 | ||
| 250 | 273 | 6.00 | 39.51 |
| 8.00 | 52.30 | ||
| 10.00 | 64.59 | ||
| 300 | 323.9 | 6.30 | 49.36 |
| 8.00 | 62.35 | ||
| 10.00 | 77.44 |
we at Hollow Section Ensure the best quality of packaging, because it plays an important role especially in case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
we at Hollow Section Ensure the best quality of packaging, because it plays an important role especially in case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
we at Hollow Section Ensure the best quality of packaging, because it plays an important role especially in case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put extraordinary concern regarding packaging.
