Hot Finish EN 10210 S355J2H RHS

Hot Finish EN10210 S355J2H Rectangular Box Sections, Hot Rolled S355J2H Mild Steel Rectangular Hollow Section Exporters, S355J2H CS Hot Finished Rectangular Pipes Distributors, BS EN 10210 S355J2H Hot Finish RHS Tubes in Mumbai, India.

Hot Finish EN 10210 S355J2H RHS Pipe, Carbon Steel S355J2H Hot Finish Rectangular Hollow Section Suppliers in Mumbai, EN10210 S355J2H MS Hot Finished Rectangular Tube Stockists in India.

EN 10210 S355J2H Seamless Hot Finish Rectangular Hollow Section Tubing, EN 10210 Hot Finish S355J2H ERW RHS Pipes Dealers in India, EN 10210 S355J2H Hot Finished Welded Structural Rectangular Hollow Sections.

   

Ranflex Metals is one of the best Manufacturer, Stockiest, Supplier, and exporter of Hot Finished S355J2H Mild Steel Rectangular Hollow Sections. This BS EN 10210 S355J2H Hot Finished RHS Tubes contains manganese content up to 1.60%, silicon & carbon 0.55%, and 0.22% respectively, and phosphorus and sulfur 0.030%. It also includes some portion of molybdenum content. The wall thickness of EN 10210 S355J2H Seamless Hot Finished Rectangular Hollow Section Tubing ranges from 0.5mm to 25mm and its 6000mm to 14000mm. Customers can grab these pipes as per their specifications.

Usually, Hot Finished EN 10210 S355J2H Rectangular Hollow Section is used between the temperature range of 500 Degree C to 800 Degree C and In continuous service, It can be used up to 899 Degree C. it can be used effectively at high elevated temperature. These Rectangular Hollow Sections are less resistant to air and water. Hot Finished EN 10210 S355J2H Rectangular Box Sections possesses high mechanical strength, and high tensile and yield strength. It possesses the best welding properties. These S355J2H Hot Finished Welded Structural Rectangular Hollow Sections are highly durable and are available at the most affordable price. This cannot be hardened further by the heat working process.

Hot Finished EN 10210 S355J2H Rectangular Hollow Section ERW Pipes are mostly used in the construction industry. It is mostly used in the construction of buildings, dams, etc. Hot Finished EN 10210 S355J2H Rectangular Hollow Section Rectangular Pipes are widely used in the marine industry and offshore oil drilling companies. It is also mostly used in the architecture industry.

Hot Finish EN 10210 S355J2H RHS Specification


Standard

  BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels

Grade

S355J2H

Sizes

  10mm x 15mm --- 150mmx50mm --- 300mmx400mm --- 600mmx550mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Hot Finish EN 10210 S355J2H RHS Properties



Hot Finish EN 10210 S355J2H RHS Services



Worldwide Exporters of Hot Finish EN 10210 S355J2H RHS