Hot Finish EN 10210 S275J2H RHS

EN 10210 S275J2H Hot Finished Welded Structural Rectangular Hollow Sections, EN 10210 S275J2H Seamless Hot Finish Rectangular Hollow Section Tubing, EN 10210 Hot Finish S275J2H ERW RHS Pipes Dealers in India.

Hot Finish EN 10210 S275J2H RHS Pipe, EN10210 S275J2H MS Hot Finished Rectangular Tube Stockists in India, Carbon Steel S275J2H Hot Finish Rectangular Hollow Section Suppliers in Mumbai.

BS EN 10210 S275J2H Hot Finish RHS Tubes, Hot Finish EN10210 S275J2H Rectangular Box Sections, Hot Rolled S275J2H Mild Steel Rectangular Hollow Section Exporters, S275J2H CS Hot Finished Rectangular Pipes Distributors in Mumbai, India.

   

Ranflex Metals is one of the best manufacturers, suppliers, and stockiest of EN 10210 S275J2H Hot Finished Rectangular Hollow Section contains manganese content up to 1.5%, phosphorus and sulfur content up to 0.030%. It also contains 0.20% carbon content. Like every other product, these Hot Finished EN 10210 S275J2H Rectangular Hollow Sections are manufactured using the best quality raw material, advanced equipment, and advanced technology. This Rectangular Hollow Section is also used in numerous industries due to its distinct features. Hot Finished En 10210 S275J2H Rectangular Hollow Section Hexagonal Pipe Is highly resistant to corrosion and it can be used extensively in the high-temperature environment. It comes in an accurate design with a seamless finish.

Hot Finished EN 10210 S275J2H Rectangular Hollow Sections are highly resistant to the acidic environment and also provides the best corrosion resistance to pitting and crevice corrosion. This is grade is mostly used at highly elevated temperatures. Hot Finished EN 10210 S275J2H Rectangular Hollow Section ERW Pipes are highly durable grade and possess high tensile strength. These Pipes can be heated between 797 Degree F to 1580 Degree F. Hot Finished EN 10210 S275J2H Rectangular Hollow Section provides the best corrosion resistance to intergranular and general corrosion. The wall thickness of these Hot Finished EN 10210 S275J2H Rectangular Hollow Section round pipes ranges from 0.5mm to 25mm. these Rectangular hollow sections are available in 20mm*20mm to 400mm*400mm. The international standards of these Hot Finished En 10210 S275J2H Rectangular Hollow Section Rectangular Pipes are ASTM. EN, DIN, and ASME.

These Rectangular Hollow Sections are widely used in numerous industries. Hot Finished S275J2H Mild Steel Rectangular Hollow Sections are mostly used in construction industries such as in the construction of dams, buildings, etc. It is also mostly used In marine industries and seawater equipment. Hot Finished EN 10210 S275J2H Rectangular Hollow Section can also be used in food processing units.

Hot Finish EN 10210 S275J2H SHS Specification


Standard

  BS EN 10210 - Hot finished structural hollow sections of non-alloy and fine grain steels

Grade

S275J2H

Sizes

 10mm x 15mm --- 150mmx50mm --- 300mmx400mm --- 600mmx550mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
Hot Finish EN 10210 S275J2H RHS Properties



Hot Finish EN 10210 S275J2H RHS Services



Worldwide Exporters of Hot Finish EN 10210 S275J2H RHS