EN 10025 S355JR/S355J0/S355J2 UPN CHANNEL

Carbon Steel S235JRH Square Hollow Section Suppliers in Mumbai, Cold Formed EN 10219 S235JRH SHS Pipe, EN 10219 S235JRH MS Cold Formed Square Tube Stockists in India.

Cold Formed S235JRH Mild Steel Square Hollow Section Exporters, BS EN 10219 S235JRH Cold Formed SHS Tubes, Cold Formed EN 10219 S235JRH Square Box Sections, S235JRH CS Cold Formed Square Pipes Distributors in Mumbai, India.

EN 10219 S235JRH Seamless Cold Formed Square Hollow Section Tubing, Grade S235JRH Cold Formed Welded Structural Square Hollow Section, EN 10219 Cold Formed S235JRH ERW SHS Pipes Dealers in India.

   

Earlier These EN 10025 S355JR MS UPE Channels are suitable to use for structural applications, such as buildings, bridges, etc. These UPE Channels are produced in different patterns. At Ranflex Metals these EN 10025 S355J2 UPE Channels are available in different shapes and patterns, customers can order these UPE Channels as per their patterns. The international standard of this channel is EN 10279: 2000.

UPN is known as standardized stainless steel channels. These channels are manufactured using scrap as it can be recycled so that we can conserve the new resources. These EN 10025 S355J2 UPN Channels possesses the best welding and mechanical properties. It is mostly used in low-temperature applications. These EN 10025 S355J0 UPN Channels offer high ductility, best durability, and high tensile strength. It also provides the best corrosion resistance properties. These EN 10025 S355JR Hot Rolled Steel UPN Channels are mostly used in the oil and gas industries, petrochemical industries, and pulp and paper industries. At Ranflex Metals, These EN 10025 S355J2 Carbon Structural Steel UPN Channels are manufactured under the proper guidance and direction of industry experts.

Earlier These EN 10025 S355JR MS UPN Channels are suitable to use for structural applications, such as buildings, bridges, etc. These UPN Channels are produced in different patterns. At Ranflex Metals these EN 10025 S355J2 UPN Channels are available in different shapes and patterns, customers can order these UPN Channels as per their patterns. The international standard of this channel is EN 10279: 2000.

EN 10025 S355JR/S355J0/S355J2 UPN CHANNEL Specification


Standard

BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade

S235JRH

SHS (Square Hollow Sections) Sizes

20*20mm-400*400mm

Wall Thickness

0.5mm - 25mm

Length

6000-14000 mm

Type

Seamless/ Welded / ERW

Dimensional Tolerances

Thickness (All sizes +/- 10%)

Packing

In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
EN 10025 S355JR/S355J0/S355J2 UPN CHANNEL Properties



EN 10025 S355JR/S355J0/S355J2 UPN CHANNEL Services



Worldwide Exporters of EN 10025 S355JR/S355J0/S355J2 METRIC BEAM Hollow Section