EN 10025 S275JR/S235J0/S235J2 PLATES

Carbon Steel S235JRH Square Hollow Section Suppliers in Mumbai, Cold Formed EN 10219 S235JRH SHS Pipe, EN 10219 S235JRH MS Cold Formed Square Tube Stockists in India.

Cold Formed S235JRH Mild Steel Square Hollow Section Exporters, BS EN 10219 S235JRH Cold Formed SHS Tubes, Cold Formed EN 10219 S235JRH Square Box Sections, S235JRH CS Cold Formed Square Pipes Distributors in Mumbai, India.

EN 10219 S235JRH Seamless Cold Formed Square Hollow Section Tubing, Grade S235JRH Cold Formed Welded Structural Square Hollow Section, EN 10219 Cold Formed S235JRH ERW SHS Pipes Dealers in India.

   

Ranflex Metals is one of the best manufacturers, suppliers, and exporters of EN 10025 S275JR / S275J0 / S275J2 Plates. It is manufactured using international quality standards. These EN 10025 S275JR Steel Plates are available in different dimensions, shapes, sizes, end finishes, and surface finishes. However, Customers can order as per their customizations. These EN 10025 S275J0 Mild Steel Plate has been an ideal choice for construction projects as it provides high strength and it gets manufactured at very cheap rates compared to others.

These EN 10025 S275J2 Plates possesses the best welding and mechanical properties. It is mostly used in low-temperature applications. These EN 10025 S275JR Plates offer high ductility, best durability, and high tensile strength. It also provides the best corrosion resistance properties. These EN 10025 S275J0 Hot Rolled Steel Plates are mostly used in the oil and gas industries, petrochemical industries, and pulp and paper industries. The thickness of these EN 10025 S275J2 Plates ranges from 5mm to 150mm, whereas its width & length ranges from 1000mm to 4500mm and 3000mm to 18000mm respectively. At Ranflex Metals, These EN 10025 S275JR Carbon Structural Steel Plates are manufactured under the proper guidance and direction of industry experts.

Earlier These EN 10025 S275J0 MS Plates are suitable to use for structural applications, such as buildings, bridges, etc.. These Plates are produced in different patterns and shapes such as in circular shape or rectangular shape. At Ranflex Metals these EN 10025 S275J2 Plates are available in different shapes and patterns, customers can order these Plates as per their patterns. These EN 10025 S275J0 Plates are majorly used in parking areas and pipe bridges.

EN 10025 S275JR/S235J0/S235J2 PLATES Specification


Standard

BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade

S235JRH

SHS (Square Hollow Sections) Sizes

20*20mm-400*400mm

Wall Thickness

0.5mm - 25mm

Length

6000-14000 mm

Type

Seamless/ Welded / ERW

Dimensional Tolerances

Thickness (All sizes +/- 10%)

Packing

In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
EN 10025 S275JR/S235J0/S235J2 PLATES Properties



EN 10025 S275JR/S235J0/S235J2 PLATES Services



Worldwide Exporters of EN 10025 S275JR/S235J0/S235J2 PLATES