EN 10025 S275JR/S275J0/S275J2 IPE BEAM

Carbon Steel S235JRH Square Hollow Section Suppliers in Mumbai, Cold Formed EN 10219 S235JRH SHS Pipe, EN 10219 S235JRH MS Cold Formed Square Tube Stockists in India.

Cold Formed S235JRH Mild Steel Square Hollow Section Exporters, BS EN 10219 S235JRH Cold Formed SHS Tubes, Cold Formed EN 10219 S235JRH Square Box Sections, S235JRH CS Cold Formed Square Pipes Distributors in Mumbai, India.

EN 10219 S235JRH Seamless Cold Formed Square Hollow Section Tubing, Grade S235JRH Cold Formed Welded Structural Square Hollow Section, EN 10219 Cold Formed S235JRH ERW SHS Pipes Dealers in India.

   

Ranflex Metals is one of the best manufacturers, suppliers, and exporters of EN 10025 S275JR IPE European Wide Flange Beams. These IPE Beams possesses the best corrosion resistance properties. The International quality standards of these European Wide Flange Beams are EN 10024; 1995. These European Wide Flange Beams can be welded, connected, and hot-rolled. Ranflex Metals, These EN 10025 S275J0 IPE Beams are manufactured under the proper guidance and direction of industry experts. It provides longer durability.

These EN 10025 S275J2 IPE Beams can carry weight at the time when wind or an earthquake occurs. These EN 10025 S275JR IPE Beams are not that heavy in weightage. Upper and These EN 10025 S275J0 IPE Beams are used in power plants, industrial sheds, warehouses, offshore structures. The upper and lower horizontal part of these EN 10025 S275J2 IPE Beams are called as flanges This EN 10025 S275J2 IPE Beam provides the required balance and stability to the construction. These EN 10025 S275J0 IPE Beams are used in most of the construction projects. These EN 10025 S275JR IPE Beams has been an ideal choice for construction projects as it provides high strength and it gets manufactured at very cheap rates comparing to other beams.

These IPE Beams are produced in different patterns and shapes such as in circular shape or rectangular shape. At Ranflex Metals these EN 10025 S275JR IPE Beams are available in different dimensions starting from 100 mm to 220mm, customers can order these IPE Beams as per their specifications. These EN 10025 S275J0 IPE Beams can also be used in refineries, railway bridges, power plants, etc. EN 10025 S275J2 IPE Beams comes with a perfect finish, compact design, and high tensile strength.

EN 10025 S275JR/S275J0/S275J2 IPE BEAM Hollow Section Specification


Standard

 BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade

 S235JRH

SHS (Square Hollow Sections) Sizes

 20*20mm-400*400mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
EN 10025 S275JR/S275J0/S275J2 IPE BEAM Hollow Section Properties



EN 10025 S275JR/S275J0/S275J2 IPE BEAM Services



Worldwide Exporters of EN 10025 S275JR/S275J0/S275J2 IPE BEAM Hollow Section