EN 10025 S235JR/S235J0/S235J2 H-BEAM

Carbon Steel S235JRH Square Hollow Section Suppliers in Mumbai, Cold Formed EN 10219 S235JRH SHS Pipe, EN 10219 S235JRH MS Cold Formed Square Tube Stockists in India.

Cold Formed S235JRH Mild Steel Square Hollow Section Exporters, BS EN 10219 S235JRH Cold Formed SHS Tubes, Cold Formed EN 10219 S235JRH Square Box Sections, S235JRH CS Cold Formed Square Pipes Distributors in Mumbai, India.

EN 10219 S235JRH Seamless Cold Formed Square Hollow Section Tubing, Grade S235JRH Cold Formed Welded Structural Square Hollow Section, EN 10219 Cold Formed S235JRH ERW SHS Pipes Dealers in India.

   

At Ranflex Metals, These EN 10025 S235JR / S235J0 / S235J2 H- Beams are manufactured under the proper guidance and direction of industry experts. It provides longer durability. These EN 10025 S235JR H- Beams are shaped like an alphabet H. The width of these EN 10025 S235J0 H- Beams ranges from 100mm to 270mm. It provides excellent strength and toughness. These EN 10025 S235J2 H- Beams can also be used in refineries, railway bridges, power plants, etc.

Ranflex Metals is one of the best manufacturers, suppliers, and exporters of EN 10025 S235JR H- Beams. These EN 10025 S235J0 H- Beams are used in most of the construction projects. These EN 10025 S235J2 H- Beams are used in power plants, industrial sheds, warehouses, offshore structures. These EN 10025 S235JR Parallel Flange Beams has been an ideal choice for construction projects as it provides high strength and it gets manufactured at very cheap rates comparing to other beams. It can be made available to any size or height.

These EN 10025 S235J0 H- Beams can carry weight at the time when wind or an earthquake occurs. These EN 10025 S235J2 H- Beams are heavier in weight compared to I shaped Beams. These EN 10025 S235JR H- Beams can carry vertical gravitational fo rce as well as horizontal loads. It has greater depth. The invention of EN 10025 S235J0 H- Beams has been proved one of the important innovations in the industry. This EN 10025 S235J2 H- Beam provides the required balance and stability to the construction.

EN 10025 S235JR/S235J0/S235J2 H-BEAM Hollow Section Specification


Standard

 BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade

 S235JRH

SHS (Square Hollow Sections) Sizes

 20*20mm-400*400mm

Wall Thickness

 0.5mm - 25mm

Length

 6000-14000 mm

Type

 Seamless/ Welded / ERW

Dimensional Tolerances

 Thickness (All sizes +/- 10%)

Packing

 In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark

Surface Protection

 Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized


 
EN 10025 S235JR/S235J0/S235J2 H-BEAM Hollow Section Properties



EN 10025 S235JR/S235J0/S235J2 H-BEAM Services



Worldwide Exporters of EN 10025 S235JR/S235J0/S235J2 H-BEAM Hollow Section