Ranflex Metals is one of the best Manufacturer, Stockiest, Supplier, and exporter of Cold Formed S355J2H Mild Steel Rectangular Hollow Sections. This BS EN 10219 S355J2H Cold Formed RHS Tubes contains manganese content up to 1.60%, silicon & carbon 0.55%, and 0.22% respectively, and phosphorus and sulfur 0.030%. It also includes some portion of molybdenum content. The wall thickness of EN 10219 S355J2H Seamless Cold Formed Rectangular Hollow Section Tubing ranges from 0.5mm to 25mm and its 6000mm to 14000mm. Customers can grab these pipes as per their specifications.
Usually, Cold Formed EN 10219 S355J2H Rectangular Hollow Section is used between the temperature range of 500 Degree C to 800 Degree C and In continuous service, It can be used up to 899 Degree C. it can be used effectively at high elevated temperature. These Rectangular Hollow Sections are less resistant to air and water. Cold Formed EN 10219 S355J2H Rectangular Box Sections possesses high mechanical strength, and high tensile and yield strength. It possesses the best welding properties. These S355J2H Cold Formed Welded Structural Rectangular Hollow Sections are highly durable and are available at the most affordable price. This cannot be hardened further by the heat working process.
Cold Formed EN 10219 S355J2H Rectangular Hollow Section ERW Pipes are mostly used in the construction industry. It is mostly used in the construction of buildings, dams, etc. Cold Formed EN 10219 S355J2H Rectangular Hollow Section Rectangular Pipes are widely used in the marine industry and offshore oil drilling companies. It is also mostly used in the architecture industry.
Standard |
BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels |
Grade |
S355J2H |
RHS Size |
10mm x 15mm --- 150mmx50mm --- 300mmx400mm --- 600mmx550mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |