Ranflex Metals is one of the best manufacturers, suppliers, and stockiest of EN 10219 S275J2H Cold Formed Rectangular Hollow Section contains manganese content up to 1.5%, phosphorus and sulfur content up to 0.030%. It also contains 0.20% carbon content. Like every other product, these Cold Formed EN 10219 S275J2H Rectangular Hollow Sections are manufactured using the best quality raw material, advanced equipment, and advanced technology. This Rectangular Hollow Section is also used in numerous industries due to its distinct features. Cold Formed En 10219 S275J2H Rectangular Hollow Section Hexagonal Pipe Is highly resistant to corrosion and it can be used extensively in the high-temperature environment. It comes in an accurate design with a seamless finish.
Cold formed EN 10219 S275J2H Rectangular Hollow Sections are highly resistant to the acidic environment and also provides the best corrosion resistance to pitting and crevice corrosion. This is grade is mostly used at highly elevated temperatures. Cold Formed EN 10219 S275J2H Rectangular Hollow Section ERW Pipes are highly durable grade and possess high tensile strength. These Pipes can be heated between 797 Degree F to 1580 Degree F. Cold Formed EN 10219 S275J2H Rectangular Hollow Section provides the best corrosion resistance to intergranular and general corrosion. The wall thickness of these Cold Formed EN 10219 S275J2H Rectangular Hollow Section round pipes ranges from 0.5mm to 25mm. these Rectangular hollow sections are available in 20mm*20mm to 400mm*400mm. The international standards of these Cold Formed En 10219 S275J2H Rectangular Hollow Section Rectangular Pipes are ASTM. EN, DIN, and ASME.
These Rectangular Hollow Sections are widely used in numerous industries. Cold Formed S275J2H Mild Steel Rectangular Hollow Sections are mostly used in construction industries such as in the construction of dams, buildings, etc. It is also mostly used In marine industries and seawater equipment. Cold Formed EN 10219 S275J2H Rectangular Hollow Section can also be used in food processing units
Standard |
BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels |
Grade |
S275J2H |
RHS Size |
10mm x 15mm --- 150mmx50mm --- 300mmx400mm --- 600mmx550mm |
Wall Thickness |
0.5mm - 25mm |
Length |
6000-14000 mm |
Type |
Seamless/ Welded / ERW |
Dimensional Tolerances |
Thickness (All sizes +/- 10%) |
Packing |
In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark |
Surface Protection |
Black (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized |